Size SAE 1” – 5”
المعوضات المطاطية عبارة عن موصلات مرنة ذات حواف SAE قابلة للدوران. تُستخدم المعوضات لتخميد التذبذبات والاهتزازات والضوضاء والحركات في الاتجاه المحوري والعرضي.
Design
Rubber compensators have a plain surface vulcanized to a fabric body (inside and outside) of the rubber part. The outside is weather resistant and protects the fabric against ageing, wear and corrosion. The interior of the rubber part consists of nitril-butadien-caoutchouc (BUNA-N). Because compensators have tightening lips on both sides, further seals are not necessary.
Use
For all mineral oil products, crude oil, lubrication oil, cooling oil (-20°C up to 80°C, intermittent 100°C), grease, cold water, warm water up to 60°C, water/oil emulsions, fuel with 30% aromatic content. For operation in suction and return lines.
Technology Date
| description | order number | size | A | B | D | E | F | G | H | L | weight | ||
| SAE | NG | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | ||||
| K16S – 25 | SDCSS025 | 1″ | 25 | 26,2 | 52,4 | 43 | 11 | 11 | 59 | 70 | 65 | +1 | 0,4 |
| -2 | |||||||||||||
| K16S – 32 | SDCSS032 | 1 ¼” | 32 | 30,2 | 58,7 | 50 | 11 | 13 | 73 | 81 | 65 | +1 | 0,5 |
| -2 | |||||||||||||
| K16S – 40 | SDCSS040 | 1 ½” | 40 | 35,7 | 70,0 | 62 | 13 | 13 | 83 | 95 | 100 | +1 | 0,8 |
| -3 | |||||||||||||
| K16S – 50 | SDCSS050 | 2″ | 50 | 42,9 | 77,8 | 72 | 13 | 13 | 97 | 103 | 100 | +1 | 1,0 |
| -3 | |||||||||||||
| K16S – 63 | SDCSS063 | 2 ½” | 63 | 50,8 | 89,0 | 87 | 14 | 13 | 109 | 115 | 100 | +1 | 1,2 |
| -3 | |||||||||||||
| K16S – 80 | SDCSS080 | 3″ | 80 | 62,0 | 106,4 | 104 | 14 | 17 | 131 | 136 | 100 | +1 | 1,8 |
| -3 | |||||||||||||
| K16S – 90 | SDCSS090 | 3 ½” | 80 | 70,0 | 120,6 | 104 | 14 | 17 | 140 | 152 | 100 | +1 | 1,9 |
| -3 | |||||||||||||
| K16S – 92 | SDCSS092 | 3 ½” | 90 | 70,0 | 120,7 | 120 | 14 | 17 | 140 | 152 | 100 | +1 | 1,9 |
| -3 | |||||||||||||
| K16S – 100 | SDCSS100 | 4″ | 100 | 77,8 | 130,2 | 130 | 16 | 17 | 153 | 162 | 100 | +1 | 2,0 |
| -3 | |||||||||||||
| K16S – 125 | SDCSS126 | 5″ | 125 | 92,0 | 152,4 | 155 | 16 | 17 | 165 | 184 | 130 | +1 | 3,0 |
| -3 | |||||||||||||
المواد
| Inside | NBR/CR |
| Outside | CR |
| Flange | Steel |
ضغط العمل
| maximum working pressure | 0,2 to 1,5 bar absolute |
Please contact us for the maximum movement tolerances of the rubber connection! Note, that dimension and tolerances have to be taken from the corresponding scale drawing.




























