Size SAE 1” – 5”
ゴム製コンペンセータは、回転可能なSAEフランジを備えた弾性コネクタです。コンペンセータは、軸方向および横方向の振動、振動、騒音、動きを減衰させるために使用されます。
Design
Rubber compensators have a plain surface vulcanized to a fabric body (inside and outside) of the rubber part. The outside is weather resistant and protects the fabric against ageing, wear and corrosion. The interior of the rubber part consists of nitril-butadien-caoutchouc (BUNA-N). Because compensators have tightening lips on both sides, further seals are not necessary.
Use
For all mineral oil products, crude oil, lubrication oil, cooling oil (-20°C up to 80°C, intermittent 100°C), grease, cold water, warm water up to 60°C, water/oil emulsions, fuel with 30% aromatic content. For operation in suction and return lines.
Technology Date
| 記述 | 注文番号 | サイズ | A | B | D | E | F | G | H | L | 重量 | ||
| SAE | NG | [mm］。 | [mm］。 | [mm］。 | [mm］。 | [mm］。 | [mm］。 | [mm］。 | [mm］。 | ||||
| K16S – 25 | SDCSS025 | 1″ | 25 | 26,2 | 52,4 | 43 | 11 | 11 | 59 | 70 | 65 | +1 | 0,4 |
| -2 | |||||||||||||
| K16S – 32 | SDCSS032 | 1 ¼” | 32 | 30,2 | 58,7 | 50 | 11 | 13 | 73 | 81 | 65 | +1 | 0,5 |
| -2 | |||||||||||||
| K16S – 40 | SDCSS040 | 1 ½” | 40 | 35,7 | 70,0 | 62 | 13 | 13 | 83 | 95 | 100 | +1 | 0,8 |
| -3 | |||||||||||||
| K16S – 50 | SDCSS050 | 2″ | 50 | 42,9 | 77,8 | 72 | 13 | 13 | 97 | 103 | 100 | +1 | 1,0 |
| -3 | |||||||||||||
| K16S – 63 | SDCSS063 | 2 ½” | 63 | 50,8 | 89,0 | 87 | 14 | 13 | 109 | 115 | 100 | +1 | 1,2 |
| -3 | |||||||||||||
| K16S – 80 | SDCSS080 | 3″ | 80 | 62,0 | 106,4 | 104 | 14 | 17 | 131 | 136 | 100 | +1 | 1,8 |
| -3 | |||||||||||||
| K16S – 90 | SDCSS090 | 3 ½” | 80 | 70,0 | 120,6 | 104 | 14 | 17 | 140 | 152 | 100 | +1 | 1,9 |
| -3 | |||||||||||||
| K16S – 92 | SDCSS092 | 3 ½” | 90 | 70,0 | 120,7 | 120 | 14 | 17 | 140 | 152 | 100 | +1 | 1,9 |
| -3 | |||||||||||||
| K16S – 100 | SDCSS100 | 4″ | 100 | 77,8 | 130,2 | 130 | 16 | 17 | 153 | 162 | 100 | +1 | 2,0 |
| -3 | |||||||||||||
| K16S – 125 | SDCSS126 | 5″ | 125 | 92,0 | 152,4 | 155 | 16 | 17 | 165 | 184 | 130 | +1 | 3,0 |
| -3 | |||||||||||||
素材
| Inside | NBR/CR |
| Outside | CR |
| Flange | スチール |
使用圧力
| maximum working pressure | 0,2 to 1,5 bar absolute |
Please contact us for the maximum movement tolerances of the rubber connection! Note, that dimension and tolerances have to be taken from the corresponding scale drawing.
SDCSS025
SDCSS032
SDCSS040
SDCSS050
SDCSS063
SDCSS080
SDCSS090
SDCSS092
SDCSS100
SDCSS125
